Name

MultilingualString

1: 1

Name of the network.

AuthorityRef

OrganisationRefStructure

1: 1

Organisation responsible (for example owner) for the network.

groupsOfLines

network#GroupOfLines

0: *

Lines (network#Line) included in the network.

tariffZones

tariffZoneRefs

0: *

Tariff zones (network#TariffZone) in the network (when relevant).

Name

MultilingualString

1: 1

Group name

members

lineRefs

0: 1

An explicit listing of lines included in the group (if appropriate)

Note that reference should link from network#Line up to network#Network through a RepresentedByGroupRef

MainLineRef

LineRefStructure

0: 1

Reference to the primary line in the group.

TransportMode

AllVehicleModesOfTransportEnumeration

0: 1

The transport mode of the group.

See Transport Modes for possible values

(attr) modification

xs:ModificationEnumeration

0: 1

Type of modification (use "delete" when a Line is permanently discontinued)

Name

MultilingualString

1: 1

Name of the line

ShortName

MultilingualString

0: 1

Short name (e.g. short version of commonly (publicly) known name)

Description

MultilingualString  

0: 1

Description

TransportMode

AllVehicleModesOfTransportEnumeration

1: 1

See Mode in Transport Modes for valid values

TransportSubmode

TransportSubmode

1: 1

See Submodes in Transport Modes for valid values (must be a TransportSubmode belonging to the selected TransportMode)

Url

xsd:anyURI

0: 1

URL to a website with information about the line.

PublicCode

xsd:normalizedString

0: 1

The publicly advertised line number, or code of the line.

Usually a number, or a number combined with a letter (eg L2, 31, 30E etc.).

The Name field normally contains more information than the PublicCode, and is often the combination of PublicCode + Name.

PrivateCode

xsd:normalizedString

0: 1

Internal (non-public) identifier for the line. For example, a code used by transport planners.

ExternalLineRef

ExternalObjectRef

0: 1

Reference (ID) to a related Line (for example, the regular line for which this is a replacement).

OperatorRef

OperatorRefStructure

1: 1

Reference to the main operator (may be omitted in exceptional cases, such as a different operator for every departure).

additionalOperators

transportOrganisationRef

0: *

Reference to additional operators of the line

TypeOfLineRef

TypeOfLineRef

0: 1

Reference to the line type. Classification, (e.g. replacement line)

Monitored

xsd:boolean

0: 1

Specifies whether real-time information normally is available for this line (set to true when real-time data exists for the line).

routes

RouteRef

0: *

Reference to a listing of all routes (network#Route) which are part of the line.

The references can normally be deduced from Line references in Routes. Therefore this field is only relevant in exceptional cases).

RepresentedByGroupRef

GroupOfLinesRefStructure

1: 1

Reference to the Lines' network#Network (alternatively a more specific reference to the GroupOfLines).

Presentation

network#Presentation

0: 1

Graphical representation information (colour, text, etc.)

AccessibilityAssessment

AccessitilityAssessment

0: 1

Universal Design - Description of the line

TariffZone inherits from Zone and does not introduce new elements or attributes.

TypeOfService inherits fromTypeOfValue and does not introduce new elements or attributes.

LineRef

LineRefStructure

1: 1

Reference to Line (network#Line) to which the Route belongs.

DirectionType

DirectionTypeEnumeration

0: 1

The direction of the route:

• inbound (towards the city centre or transport hub)

• outbound (from the city centre or transport hub) 

• clockwise (circular route in the clockwise direction)

• anticlockwise (circular route in the anticlockwise direction)

To be able to identify full- or partial circular routes clockwise/anticlockwise must be specified.

pointsInSequence

network#PointOnRoute

1: *

List of the routes points 

InverseRouteRef

RouteRefStructure

0: 1

Reference to any route that goes in the opposite direction

BorderCrossing

xsd:boolean

0: 1

Specifies whether the point is on the border between two countries.

tariffZones

TariffZoneRef

0: 1

List of TariffZones (network#TariffZone) the StopPoint belongs to.

Presentation

network#Presentation

0: 1

Graphical elements related to StopPoint

TimingPointStatus

TimingPointStatusEnumeration

0: 1

Type of TimingPoint:

• timingPoint

• notTimingPoint (may indicate the expected passing time)

AllowedForWaitTime

xsd:duration

0: 1

Allowed waiting time at the TimingPoint.

LinkSequenceRef

LinkSequenceRefStructure

0: 1

Reference to LinkSequence to which the point belongs.

RouteRef should be used since network#Route inherits from LinkSequence.

Note that the field should not be used if PointOnRoute is defined inline in network#Route.

projections

Projection

0: *

Projection on a point (RoutePoint, TimingPoint, SchedueledStopPoint) or a GML-coordinate projection.

PointRef

PointRefStructure

1: 1

Reference to Point

RoutePointRef should be used to point to the corresponding network#RoutePoint.

FromPointRef

RoutePointRef

1: 1

The start point for the RouteLink

ToPointRef

RoutePointRef

1: 1

The endpoint for the RouteLink

Distance

xsd:decimal

0: 1

Distance in meters for ServiceLink, i.e. driving distance between FromPoint and ToPoint.

projections

LinkSequenceProjection

0: 1

Projection with <gml:LineString> indication of position.

FromPointRef

ScheduledStopPointRef

1: 1

The start point for the ServiceLink.

ToPointRef

ScheduledStopPointRef

1: 1

The endpoint for ServiceLink.

ScheduledStopPointRef

ScheduledStopPointRef

1: 1

Reference to network#ScheduledStopPoint

elem

StopPlaceRef

StopPlaceRef

0: 1

Reference to StopPlace which is related to network#ScheduledStopPoint

Should be included as far as possible, but the StopPlace can also be derived from the referenced Quay (QuayRef) when the StopPlaceRef is missing

elem

QuayRef

QuayRef

1: 1

Reference to an actual Quay on StopPlace

elem

trainElements

TrainStopAssignmentRef

0: *

References to a detailed position on platform (network#TrainStopAssignment)

Used only for trains

attr

order

xsd:integer

1: 1

The Assignment order.

The "order" attribute is inherited from the more generic type Assignment, but in the case of a PassengerStopAssignment its business meaning is undefined. It is however mandatory due to an XML schema validation constraint.
Examples of valid implementations:

• an incremented sequence number ("1", "2", "3", ...)

• a constant value ("0")

FlexibleStopPlaceRef

FlexibleStopPlaceRef

1: 1

Reference to FlexibleStopPlace which is related to network#ScheduledStopPoint

(choice) FlexibleQuayRef

FlexibleQuayRef

0: 1

Reference to a FlexibleQuay.

Can be added in a supplementary role if a FlexibleQuay is used.

(choice) FlexibleAreaRef

FlexibleAreaRef

0: 1

Reference to an actual FlexibleArea

Can be added in a supplementary role if a FlexibleArea is defined for the FlexibleStopPlace.

(choice) HailAndRideAreaRef

HailAndRideAreaRef

0: 1

Reference to an actual HailAndRideArea

Can be added in a supplementary role if a HailAndRideArea is defined for the FlexibleStopPlace.

PassengerStopAssignmentRef

PassengerStopAssignmentRef

0: 1

Reference to network#PassengerStopAssignment

TrainRef

TrainRef

0: 1

Reference to Train.

TrainComponentRef

TrainComponentRef

0: 1

Reference to specific cars (TrainComponent).

BoardingPositionRef

BoardingPositionRef

0: 1

Reference to BoardingPosition.

EntranceToVehicle

MultilingualString

0: 1

Specifying entrances to the carriage, e.g. "front door", "rear door", etc.

PrivateCode

xsd:normalizedString

0: 1

Internal (non-public) identifier for the JourneyPattern.

RouteRef

RouteRef

1: 1

Reference to network#Route used in the JourneyPattern.

runTimes

JourneyPatternRunTime

0: *

Description of RunTimes for the JourneyPattern.

Only used when describing frequency-based departures.

waitTimes

JourneyPatternWaitTime

0: *

Description of WaitTime for JourneyPattern

Normally used only when describing frequency-based departures.

headways

JourneyPatternHeadway

0: *

Description of JourneyHeadway for JourneyPattern

Only used when describing frequency-based departures.

pointsInSequence

PointInJourneyPattern

0: *

Sorted list of points in JourneyPattern. Must be network#StopPointInJourneyPattern or network#TimingPointInJourneyPattern.

linksInSequence

network#LinkInJourneyPattern

0: *

Sorted list of links in JourneyPattern. Must be network#ServiceLinkInJourneyPattern or network#TimingLinkInJourneyPattern.

ScheduledStopPointRef

ScheduledStopPointRef

1: 1

Reference to network#ScheduledStopPoint

ForAlighting

xsd:boolean

0: 1

Specifies whether alighting is allowed.

Should be explicitly indicated (normally "false") for the first StopPointInJourneyPattern

ForBoarding

xsd:boolean

0: 1

Specifies whether boarding is allowed.

Should be explicitly indicated (normally "false") for last StopPointInJourneyPattern

DestinationDisplayRef

DestinationDisplayRef

0: 1

Reference to network#DestinationDisplay

The required minimum for linear routes is for the first StopPointInJourneyPattern to have a DestinationDisplayRef. For circular routes, the minimum is two.

A new DestinationDisplayRef should be set at any StopPointInJourneyPattern along the route where it is relevant to update the destination text. This is particularly relevant for circular routes.

FlexiblePointProperties

network#FlexiblePointProperties

0: 1

Properties of a stop point related to flexible transport.

RequestStop

xsd:boolean

0: 1

Specifies whether passengers must signal to use this stop point.

RequestMethod

RequestMethodTypeEnumeration

0: 1

Possible values for hailing or arranging a stop:

• handSignal

• phoneCall

• sms

• stopButton

• turnOnLight

BookingArrangements

network#BookingArrangementsStructure

0: 1

Rules for booking.

Please note that BookingArrangements specified at the StopPointInJourneyPattern level will always override equivalent specifications at the Line- or ServiceJourney level.

BookingContact

ContactStructure

0: 1

Contact information for booking

Note that the field is mandatory if this is not already on network#FlexibleLine or overridden in FlexibleServiceProperties

BookingMethods

BookingMethodListOfEnumerations

0: 1

Possible ways to book (must match info found in BookingContact):

• callDriver

• callOffice

• online

• phoneAtStop

• text (text message/SMS)

Note that the field is mandatory if this is not already on network#FlexibleLine or overridden in FlexibleServiceProperties

BookingAccess

BookingAccessEnumeration

0: 1

Who may place an order (book):

• public

• authorisedPublic (eg TT-transport - special services for mobility restricted travellers )

• staff

BookWhen

PurchaseWhenEnumeration

0: 1

Time constraints for booking:

• timeOfTravelOnly

• dayOfTravelOnly

• untilPreviousDay

• advanceAndDayOfTravel

Note that the field is mandatory if this is not already on network#FlexibleLine or overridden in FlexibleServiceProperties

BuyWhen

PurchaseMomentListOfEnumerations

0: 1

Time constraints for payment:

• onReservation

• beforeBoarding

• afterBoarding

• onCheckOut

LatestBookingTime

xsd:time

0: 1

Latest possible booking time.

MinimumBookingPeriod

xsd:duration

0: 1

The minimum period prior to the departure the booking has to be placed.

BookingNote

xsd:normalizedString

0: 1

Additional information about the order.

TimingPointRef

TimingPointRef

1: 1

Reference to network#TimingPoint

WaitTime

xsd:duration

0: 1

Wait time at the timing point

(choice) TimingLinkInJourneyPattern

network#TimingLinkInJourneyPattern

1: 1

Sorted list of TimingLinks

(choice) ServiceLinkInJourneyPattern

network#ServiceLinkInJourneyPattern

1: 1

Sorted list of ServiceLinks

TimingLinkRef

TimingLinkRef

1: 1

Reference to ServiceLink

ServiceLinkRef

ServiceLinkRef

1: 1

Reference to ServiceLink

SideText

MultilingualString

0: 1

The text displayed on the side of the vehicle body.

FrontText

MultilingualString

1: 1

The text displayed on the front of the vehicle, commonly above the front window.

vias

network#Via

0: 1

An intermediary destination which the vehicle will pass before reaching its final destination.

Eg. Oslo tram line 11: "Majorstuen - Kjelsås via Torshov"

variants

network#DestinationDisplayVariant

0: *

Variations of DestinationDisplay adapted for particular media types

Note that for composite DestinationDisplay text, e.g. line number and destination name. The minimum requirement is to provide a DestinationDisplay for web sites, with a destination name.

DestinationDisplayVariantMediaType

DeliveryVariantTypeEnumeration

1: 1

Supported media types:

• Printed

• TextToSpeech

• Web

• Mobile

• other (e.g. real-time display)

FrontText

MultilingualString

1: 1

Frontpage text for DestinationDisplay

DestinationDisplayRef

DestinationDisplayRef

1: 1

Reference to the network#DestinationDisplay object describing the stop place/area the vehicle is headed towards.

RoutePointRef

RoutePointRef

0: 1

Reference to RoutePoint.

ViaType

ViaTypeEnumeration

0: 1

Possible values:

• stopPoint

• name

FlexibleLineType

FlexibleLineTypeEnumeration

1: 1

Flexible line types:

• corridorService

• mainRouteWithFlexibleEnds

• flexibleAreasOnly

• hailAndRideSections

• fixedStopAreaWide

• mixedFlexible

• mixedFlexibleAndFixed

• fixed

BookingContact

ContactStructure

0: 1

Contact information for booking.

BookingMethods

BookingMethodListOfEnumerations

0: 1

Possible booking methods:

• callDriver

• callOffice

• online

• phoneAtStop

• text (text message/SMS)

BookingAccess

BookingAccessEnumeration

0: 1

Who may place an order (book):

• public

• authorisedPublic

• staff

BookWhen

PurchaseWhenEnumeration

0: 1

Time constraints for booking:

• timeOfTravelOnly

• dayOfTravelOnly

• untilPreviousDay

• advanceAndDayOfTravel

BuyWhen

PurchaseMomentListOfEnumerations

0: 1

Time constraints for payment:

• onReservation

• beforeBoarding

• afterBoarding

• onCheckOut

LatestBookingTime

xsd:time

0: 1

Latest possible booking time.

MinimumBookingPeriod

xsd:duration

0: 1

The minimum period prior to the departure the booking has to be placed.

BookingNote

xsd:normalizedString

0: 1

Additional information about the order.

FlexibleStopPlaceRef

FlexibleStopPlaceRef

1: 1

Reference to FlexibleStopPlace

Name

MultilingualString

0: 1

Name of the transfer

Description

MultilingualString

0: 1

Textual description

Distance

xsd:decimal

1: 1

Total length for transfer (in meters)

TransferDuration

network#TransferDuration

1: 1

Detailed description for duration transfer

BothWays

xsd:boolean

0: 1

Specifies whether the transfer is possible in both directions