Page Comparison

Organization reponsible for the network

Main transport type for the line

See Mode in Transport Modes for valid values

Transporttype-underkategori for linjen

See Submodes in Transport Modes for valid values (must be TransportSubmode of the type corresponding to the selected TransportMode)

Public Line Identifier (advertised identifier)

Usually a number that can be combined with a letter (eg L2, 31, etc.).

Name normally contains more information than the code, so the full name of the line is usually the compilation of PublicCode and Name

Reference (ID) to related Line (e.g. original line this is a replacement line for)

1: 1

Reference to main operator (may exceptionally be omitted, eg if line is run with own operator for each departure)

Reference to the additional operators on the line

Reference to the line type

Classification of the line (eg replacement line)

Specifies whether real-time information is normally provided for this line (to be provided for real-time data providers)

Reference to a list of routes (network#Route) for the actual line

This can normally be deduced from the Routes that have reference to the line, and it is only appropriate to state when these are described from Line (eg in other delivery / file).

RepresentedByGroupRef

Graphical representation information (color, text, etc.)

THe routes direction:

• inbound (towards city-/ regioncenter or hub of transport)
• outbound (from  center/ hub of transport) 
• clockwise
• anticlockwise

To be able to identify full or partial circular routes, clockwise / anticlockwise must be specified

Specifies whether the point is on the border between two countries

Reference to LinkSequence the point belongs. 

RouteRef should be uses, since network#Route inherits from LinkSequence.

Note that the field should not be used if PointOnRoute defined inline in network#Route.

Projection on a point (RoutePoint, TimingPoint, SchedueledStopPoint) or a gml-coordinateprojection .

Reference to Point

RoutePointRef should be used to point to the corresponding network#RoutePoint.

Reference to StopPlace which is related to network#ScheduledStopPoint

Should be included as far as possible, but StopPlace for referenced Quay can be derived centrally by missing StopPlaceRef

References to a detailed position on platform (network#TrainStopAssignment)

Used only for trains

Specifies if disembarking is allowed. 

Should be indicated explicit (normal "false") for first StopPointInJourneyPattern

Specifies if boarding is allowed 

Should be explicit (normal "false") for last StopPointInJourneyPattern

Reference to network#DestinationDisplay

Required minimum that reference is set for the first StopPointInJourneyPattern, referring to the text the audience sees when the vehicle arrives

Must also be set anywhere where display of destination information changes

Method used to signal that the transport must stop:

• handSignal
• phoneCall
• sms
• stopButton
• turnOnLight

Provisions if the operation of a stop must be pre-booked

Note that if one or more BookingArrangement fields are specified on a given StopPointInJourneyPattern, for that particular stop, this will always override any corresponding fields specified for network#Line and / or ServiceJourney.

Contact information for ordering

Note that the field is mandatory if this is not already on network#FlexibleLine or overridden in FlexibleServiceProperties

Possible ways to order (must match info found in BookingContact):

• callDriver
• callOffice
• online
• phoneAtStop
• text (sms)

Note that the field is mandatory if this is not already on network#FlexibleLine or overridden in FlexibleServiceProperties

Kategorier som har lov å bestille:

• public
• authorisedPublic (f.eks. TT-transport)
• staff

Tidspunkt når bestillingen må være gjort:

• timeOfTravelOnly
• dayOfTravelOnly
• untilPreviousDay
• advanceAndDayOfTravel

Merk at feltet er obligatorisk dersom dette ikke allerede er satt på network#FlexibleLine eller overstyres i FlexibleServiceProperties

Tidspunkt når bestillingen må betales:

• onReservation
• beforeBoarding
• afterBoarding
• onCheckOut

Minste periode i forkant av avgang bestillingen må være gjort

Tilleggsdestinasjon som viser spesifikke steder transportmiddelet passerer på vei til endelig destinasjon,

F.eks. trikk 11: Majorstuen - Kjelsås o/Torshov

Varianter av tekst tilpasset diverse media

Merk at ved sammensatt DestinationDisplay-tekst, f.eks. linjenummer og destinasjonsnavn, skal det også som minimum sendes inn DestintaionDisplay for "web" som kun inneholder destinasjonsnavnet (uten tilleggstekst)

Type bestillingstransport:

• corridorService
• mainRouteWithFlexibleEnds
• flexibleAreasOnly
• hailAndRideSections
• fixedStopAreaWide
• mixedFlexible
• mixedFlexibleAndFixed
• fixed

Kontakinformasjon for å gjøre bestilling

0: 1

Mulige måter å bestille på:

• callDriver
• callOffice
• online
• phoneAtStop
• text (sms)

Kategorier som har lov å bestille:

• public
• authorisedPublic (f.eks. TT-transport)
• staff

Tidspunkt når bestillingen må være gjort:

• timeOfTravelOnly
• dayOfTravelOnly
• untilPreviousDay
• advanceAndDayOfTravel

Tidspunkt når bestillingen må betales:

• onReservation
• beforeBoarding
• afterBoarding
• onCheckOut

Minste periode i forkant av avgang bestillingen må være gjort