Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info

The Nordic NeTEx profile allows for more elements to be added to stop places. This guide covers only the most fundamental data points.

Element

What it does

Quay

Marks the exact position where a vehicle stops, and its equipment.

Gliffy
imageAttachmentIdatt1243414667
macroIdaa43373a-7cb9-45b2-a992-33c7b31fe4c4
baseUrlhttps://enturas.atlassian.net/wiki
macroId
aa43373a-7cb9-45b2-a992-33c7b31fe4c4
namesimple-multimodal-stopplace
diagramAttachmentIdatt1241809220
containerId1243381914
timestamp1587571153115

StopPlace

Connects nearby Quays into a single stop with a common name, and sometimes common facilities or equipment.

Multimodal StopPlace (or parentStop)

Makes it possible to have two StopPlaces with different modalities connected as a single element.

A fundamental principle

The structure of a stop should always reflect the actual conditions and physical reality of the stop. Any fictitious data is disallowed in order to keep the data cleangeneric, sustainable and predictable. This means the stops must be placed where they actually are rather than making adjustments to suit external needs.

Placing elements on the map

Quay

Info

The positioning of stops is regulated by Håndbok N801.

The Quay should be placed to correspond as precisely as possible with the estimated boarding position of a vehicle, usually on the front door of the vehicle or the exit point of a sea vessel. For a bus, this point is primarily the edge of the pavement or platform at the tactile paving mark. When no tactile paving exists the position is estimated. When the stop has no pavement the general position is estimated based on how the bus may fit into the existing space, placement of signs or shelters, or the otherwise most logical location to stop a bus along the road.

...

  • A precise placement reduces the need for future revisions of data and makes pedestrian routing more predictable.

...

For modalities which do not have a specific point of boarding, a centredcentered- or weighted point, is preferable as seen in reference to the access points of the stop.

StopPlace

The placement of the StopPlace element has no regulation but it is sensible to locate these on the centerline of the road to which its subordinate Quays belong. StopPlace can, for example, be used for icon placement in maps and placement in connection with the road centerline is therefore advantageous. In cases of a public transport terminal or other wider area which may be considered the same stop place a centred centered position is preferable, as experienced by the traveller.

Multimodal StopPlace

The position of this element should generally follow the same standards as the StopPlace. It can also be a good idea to not place these elements directly on top of a StopPlace since they may then block each other from being clicked on the map.

Parking positions

A centred centered position for these elements is preferable. For very large areas, such as an airport parking, a positing near the access point to the airport - or splitting the parking into several objects may be useful.

Naming a stop

Info

The naming of stops is regulated by Håndbok N801.

...

When a stop with a name which is too general exists together with other stops referencing the same name, for example, “Vikersund” and “Vikersund fire station”, it is preferable to change the first stop name into a more specific and descriptive name, or sometimes to make both names equal and combine them into a multimodal stop (assuming they have physical proximity).

Description field on StopPlace

The use of the description field differs between StopPlace and Quay. For StopPlace it should be seen as an extension of the name field. So if the stop name is “Main Street” the description field can be “by the harbour”. For this reason, it is advised to begin this field in lowercase letters.

Alternative names

It is possible to add alternative names to stops which can assist the customer to find the stop they are looking for. Since the alternative name is usually not displayed to the customer it is important that the names are closely linked.

Examples

Quality

Name of stop place

Alternative name

Comment

Good

Nationaltheatret

Nasjonalteatret

The unusual spelling of the stop is assisted by the often presumed spelling.

Uneccesary

Fjellveien

Fjellvegen

The geocoder is flexible enough that small variations in spelling can be overlooked.

Bad

Fjellveien

Dalsveien

Applying a completely different name will cause confusion as for why the name Fjellveien would appear when searching for Dalsveien. Remember that the customer can’t know what you were thinking of when adding the name.

It is advisable to use alternative names as sparsely as possible, and only when it adds value for the end user.

Label

  • For airports, the location portion of the airport name is added as the type: Label.

Translation

For stops where a translation of the stop name is commonly used or important due to extensive tourism, it is possible to add name values for a number of other languages. This can also be used for stops outside of Norway.

Please note that it is possible to add translations for all three alternative name types.

All alternative names added, regardless of type or translation will be searchable in the Entur geocoder which will return the name of the stop place.

...

Quay

The Quay element has three fields, public code, private code and Description.

PublicCode

Must be a code (not words)

Used when a position (quay) is marked with a code. See more below.

PrivateCode

Used freely by the local authority for any purpose. This field is not communicated to the public.

Description

Should start with a lowercase word which describes the location of the quay. Only use when extra information is needed.

Used to extend the StopPlace name. See naming rules above.

Public code

This field should only be filled out when the Quay has a clearly visible (from a distance) code (number or letter) marked on the infrastructure of the platform which is distinct from the other platforms. If several platforms cohabit on the same code this should be clearly visible to the customer.

When the Quay has no clearly visible coding the PublicCode field must be left empty.

It is not sufficient to have a code indicated in small print on the timetable board.

Image Added

A large print letter or number on thet timetable board is concidered sufficient but not recommended. The reason is that a time table board is specific to the owner of that board.

When multiple operators serve the stop this may cause confusion.

Image Added

Clear large print markings on the wall or roof of the shelter is in full complience.

Image Added

A free standing large print sign on the platform is in full complience.

Image Added