Organization reponsible for the network

Explicit listing of lines included in the group (if appropriate)

Note that reference should normally go from  network#Line up to network#Networkc through a RepresentedByGroupRef

Type of transport

See Transport Modes for possible values

Main transport type for the line

See Mode in Transport Modes for valid values

Transporttype-underkategori for linjen

See Submodes in Transport Modes for valid values (must be TransportSubmode of the type corresponding to the selected TransportMode)

Public Line Identifier (advertised identifier)

Usually a number that can be combined with a letter (eg L2, 31, etc.).

Name normally contains more information than the code, so the full name of the line is usually the compilation of PublicCode and Name

Reference (ID) to related Line (e.g. original line this is a replacement line for)

1: 1

Reference to main operator (may exceptionally be omitted, eg if line is run with own operator for each departure)

Reference to the additional operators on the line

Reference to the line type

Classification of the line (eg replacement line)

Specifies whether real-time information is normally provided for this line (to be provided for real-time data providers)

Reference to a list of routes (network#Route) for the actual line

This can normally be deduced from the Routes that have reference to the line, and it is only appropriate to state when these are described from Line (eg in other delivery / file).

RepresentedByGroupRef

Graphical representation information (color, text, etc.)

Hexadecimal representation of the line color RGB values (for red, green and blue respectively)

The field specifies the color of the line record in information material and maps, e.g. "FDB927" = (253, 185, 39) = Yellow

Hexadecimal representation of the line color RGB values (for red, green and blue respectively)

The field specifies the color of the line record in information material and maps, e.g. "FFFFFF" = (255, 255, 255) = White

Font identifier (font)

Not normally used

The routes direction:

• inbound (towards city-/ regioncenter or hub of transport)
• outbound (from  center/ hub of transport) 
• clockwise
• anticlockwise

To be able to identify full or partial circular routes, clockwise / anticlockwise must be specified

Specifies whether the point is on the border between two countries

Type of TimingPoint:

• timingPoint
• notTimingPoint (may indicate the expected passage time)

Reference to LinkSequence the point belongs. 

RouteRef should be uses, since network#Route inherits from LinkSequence.

Note that the field should not be used if PointOnRoute defined inline in network#Route.

Projection on a point (RoutePoint, TimingPoint, SchedueledStopPoint) or a gml-coordinateprojection .

Reference to Point

RoutePointRef should be used to point to the corresponding network#RoutePoint.

Distance in meters for ServiceLink, ie driving distance between FromPoint and ToPoint

ScheduledStopPointRef

Reference to StopPlace which is related to network#ScheduledStopPoint

Should be included as far as possible, but StopPlace for referenced Quay can be derived centrally by missing StopPlaceRef

References to a detailed position on platform (network#TrainStopAssignment)

Used only for trains

Reference to an actual FlexibleQuay

Can be added as a supplement if you have defined FlexibleQuay for where the vehicle of transport should stop

Reference to an actual FlexibleArea

Can be added as a supplement if you have defined FlexibleArea for current FlexibleStopPlace

Reference to an actual HailAndRideArea

Can be added as a supplement if you have defined HailAndRideArea for current FlexibleStopPlace

Internal (unannounced) identifier for current JourneyPattern

Description of RunTime for JourneyPattern

Only used when describing frequency-based departures

Description of WaitTime for JourneyPattern

Used normally when describing frequency-based departures

Description of JourneyHeadway for JourneyPattern

Only used when describing frequency-based departures

Specifies if disembarking is allowed. 

Should be indicated explicit (normal "false") for first StopPointInJourneyPattern

Specifies if boarding is allowed 

Should be explicit (normal "false") for last StopPointInJourneyPattern

Reference to network#DestinationDisplay

Required minimum that reference is set for the first StopPointInJourneyPattern, referring to the text the audience sees when the vehicle arrives

Must also be set anywhere where display of destination information changes

Method used to signal that the transport must stop:

• handSignal
• phoneCall
• sms
• stopButton
• turnOnLight

Provisions if the operation of a stop must be pre-booked

Note that if one or more BookingArrangement fields are specified on a given StopPointInJourneyPattern, for that particular stop, this will always override any corresponding fields specified for network#Line and / or ServiceJourney.

Contact information for ordering

Note that the field is mandatory if this is not already on network#FlexibleLine or overridden in FlexibleServiceProperties

Possible ways to order (must match info found in BookingContact):

• callDriver
• callOffice
• online
• phoneAtStop
• text (sms)

Note that the field is mandatory if this is not already on network#FlexibleLine or overridden in FlexibleServiceProperties

Categories to order:

• public
• authorisedPublic (eg TT-transport)
• staff

Time when the order must be made:

• timeOfTravelOnly
• dayOfTravelOnly
• untilPreviousDay
• advanceAndDayOfTravel

Note that the field is mandatory if this is not already on network#FlexibleLine or overridden in FlexibleServiceProperties

Time when the order must be paid:

• onReservation
• beforeBoarding
• afterBoarding
• onCheckOut

The minimum period prior to the departure of the booking must be made

Text displayed on the side of the vehicle of transport

Text displayed on the front of the vehicle of transport

Additional destination showing the specific locations of the vehicle of transport passing on the way to final destination,

Eg. tram11: Majorstuen - Kjelsås o/Torshov

Variants of text adapted to various media

Note that for composite DestinationDisplay text, e.g. line number and destination name, it must also at least be sent DestinationDisplay for "web" containing only the destination name (without additional text)

Supported media type:

• Printed
• TextToSpeech
• Web
• Mobile
• other (eg. real-time display)

Frontpage text for DestinationDisplay

Reference to network#DestinationDisplay object describing the stopplace / area the vehicle passes

Possible values:

• stopPoint
• name

Type order of transport:

• corridorService
• mainRouteWithFlexibleEnds
• flexibleAreasOnly
• hailAndRideSections
• fixedStopAreaWide
• mixedFlexible
• mixedFlexibleAndFixed
• fixed

Contact information for ordering 

0: 1

Possible ways to order :

• callDriver
• callOffice
• online
• phoneAtStop
• text (sms)

Categories that are allowed to order:

• public
• authorisedPublic (f.eks. TT-transport)
• staff

Time when the order must be made:

• timeOfTravelOnly
• dayOfTravelOnly
• untilPreviousDay
• advanceAndDayOfTravel

Time when the order must be paid:

• onReservation
• beforeBoarding
• afterBoarding
• onCheckOut

The minimum period prior to the departure of the booking must be made

Detailed description for duration transfer

Time it will take for a person known on the place to make the transfer

Time it will take one for a person unknown on the place to make the transfer

Time to take a disabled person to make a transfer