Skip to end of banner
Go to start of banner

SIRI SX - Melding med stopCondition på ett kjøretøy

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Current »

Content


XML

See complete examples:

Messages depending on stopCondition

The message is only shown when the affected stop is the target or origin of a travel search request

The message is displayed depending on the search request parameters, time and StopConditions.

stopCondition
<!---For Vehicle 1--->
<AffectedStopPoint>                          
	<StopPointRef>NSR:Quay:1067</StopPointRef> 
    <StopPointName>Dovre</StopPointName>
    <StopCondition>destination</StopCondition>
    <StopCondition>startPoint</StopCondition>
</AffectedStopPoint>

The message will be displayed when searching from- or to Dovre.

The following is true for the illustration:

  • Search 1 will not show the message
  • Search 2 will show the message
  • Search 3 will not show the message
  • Search 4 will show the message due to startPoint at Dovre
  • Search 5 will not show the message

The message is only shown when boarding a specific vehicle (departure) on a specific stop

The message is referenced by multiple stops on the same specific VehicleJourney (specific departure on a specific date set with <VehicleJourneyRef> and <OriginAimedDepartureTime>).

stopConditions are set to 'startPoint' for all stops, and the message will only be shown when searching a journey on the specific date, with the specific departure, from one of the specific stops.

stopCondition
<!---For Vehicle 1--->
<StopPoints>
	<AffectedStopPoint>
    	<StopPointRef>NSR:Quay:629</StopPointRef>
        <StopPointName>Kvam</StopPointName>
        <StopCondition>startPoint</StopCondition>
	</AffectedStopPoint>
    <AffectedStopPoint>
    	<StopPointRef>NSR:Quay:652</StopPointRef>
        <StopPointName>Dovre</StopPointName>
        <StopCondition>startPoint</StopCondition>
	</AffectedStopPoint>
    <AffectedStopPoint>
    	<StopPointRef>NSR:Quay:316</StopPointRef>
        <StopPointName>Oppdal</StopPointName>
        <StopCondition>startPoint</StopCondition>
	</AffectedStopPoint>
</StopPoints>

The following is true for the illustration:

  • Search 1 will not show the message
  • Search 2 will not show the message
  • Search 3 will not show the message
  • Search 4 will show the message
  • Search 5 will not show the message

The message is shown for all searches to-, from, or past the specified stops on a vehicle (departure)

The message is applied to multiple successive stops on a VehicleJourney, on a specific OriginAimedDepartureTime.

The message is shown in search responses where the particular vehicle, stop, and date appears but depends on the stopConditions on the stops.

stopCondition
<!---For Vehicle 1--->
<StopPoints>
	<AffectedStopPoint>
    	<StopPointRef>NSR:Quay:4</StopPointRef>
        <StopPointName>Otta</StopPointName>
        <StopCondition>startPoint</StopCondition>
	</AffectedStopPoint>
    <AffectedStopPoint>
    	<StopPointRef>NSR:Quay:652</StopPointRef>
        <StopPointName>Dovre</StopPointName>
        <StopCondition>notStopping</StopCondition>
        <StopCondition>destination</StopCondition>
        <StopCondition>startPoint</StopCondition>
	</AffectedStopPoint>
    <AffectedStopPoint>
    	<StopPointRef>NSR:Quay:645</StopPointRef>
        <StopPointName>Dombås</StopPointName>
        <StopCondition>notStopping</StopCondition>
        <StopCondition>destination</StopCondition>
        <StopCondition>startPoint</StopCondition>
	</AffectedStopPoint>
    <AffectedStopPoint>
    	<StopPointRef>NSR:Quay:316</StopPointRef>
        <StopPointName>Oppdal</StopPointName>
        <StopCondition>destination</StopCondition>
	</AffectedStopPoint>
</StopPoints>

The following is true for the illustration:

  • Search 1 will not show the message
  • Search 2 will show the message due to Dovre being the destination
  • Search 3 will show the message twice, due to notStopping at Dovre and notStopping at Dombås
  • Search 4 will show the message three times, due to startPoint at Dovre, notStopping at Dombås and destination at Oppdal
  • Search 5 will not show the message

The message is shown when searching past a specific stop on a vehicle (departure)

The message is applied to multiple successive stops on a VehicleJourney, on a specific OriginAimedDepartureTime.

The message is shown in search responses where the particular vehicle- and stop.

stopCondition
<!---For Vehicle 1--->
<AffectedStopPoint>
	<StopPointRef>NSR:Quay:652</StopPointRef>
    <StopPointName>Dovre</StopPointName>
    <StopCondition>notStopping</StopCondition>
</AffectedStopPoint>

The following is true for the illustration:

  • Search 1 will not show the message
  • Search 2 will not show the message
  • Search 3 will show the message
  • Search 4 will not show the message
  • Search 5 will not show the message




  • No labels