Name

MultilingualString

1: 1

Name of the network.

AuthorityRef

OrganisationRefStructure

1: 1

Organisation responsible (for example owner) for the network.

groupsOfLines

GroupOfLines

0: *

Lines (Line) included in the network.

tariffZones

tariffZoneRefs

0: *

Tariff zones (TariffZone) in the network (when relevant).

Name

MultilingualString

1: 1

Group name

members

lineRefs

0: 1

An explicit listing of lines included in the group (if appropriate)

Note that reference should link from Line up to Network through a RepresentedByGroupRef

MainLineRef

LineRefStructure

0: 1

Reference to the primary line in the group.

TransportMode

AllVehicleModesOfTransportEnumeration

0: 1

The transport mode of the group.

See Transport Modes for possible values

(attr) modification

xs:ModificationEnumeration

0: 1

Type of modification (use "delete" when a Line is permanently discontinued)

Name

MultilingualString

1: 1

Name of the line

ShortName

MultilingualString

0: 1

Short name (e.g. short version of commonly (publicly) known name)

Description

MultilingualString  

0: 1

Description

TransportMode

AllVehicleModesOfTransportEnumeration

1: 1

See Mode in Transport Modes for valid values

TransportSubmode

TransportSubmode

1: 1

See Submodes in Transport Modes for valid values (must be a TransportSubmode belonging to the selected TransportMode)

Url

xsd:anyURI

0: 1

URL to a website with information about the line.

PublicCode

xsd:normalizedString

0: 1

The publicly advertised line number, or code of the line.

Usually a number, or a number combined with a letter (eg L2, 31, 30E etc.).

The Name field normally contains more information than the PublicCode, and is often the combination of PublicCode + Name.

PrivateCode

xsd:normalizedString

0: 1

Internal (non-public) identifier for the line. For example, a code used by transport planners.

ExternalLineRef

ExternalObjectRef

0: 1

Reference (ID) to a related Line (for example, the regular line for which this is a replacement).

OperatorRef

OperatorRefStructure

1: 1

Reference to the main operator (may be omitted in exceptional cases, such as a different operator for every departure).

additionalOperators

transportOrganisationRef

0: *

Reference to additional operators of the line

TypeOfLineRef

TypeOfLineRef

0: 1

Reference to the line type. Classification, (e.g. replacement line)

Monitored

xsd:boolean

0: 1

Specifies whether real-time information normally is available for this line (set to true when real-time data exists for the line).

routes

RouteRef

0: *

Reference to a listing of all routes (Route) which are part of the line.

The references can normally be deduced from Line references in Routes. Therefore this field is only relevant in exceptional cases).

RepresentedByGroupRef

GroupOfLinesRefStructure

1: 1

Reference to the Lines' Network (alternatively a more specific reference to the GroupOfLines).

Presentation

Presentation

0: 1

Graphical representation information (colour, text, etc.)

AccessibilityAssessment

AccessibilityAssessment

0: 1

Universal Design - Description of the line

Colour

ColourValueType

0: 1

Six digit hexadecimal representation of the lines' RGB colour values.

TextColour

ColourValueType

0: 1

Six digit hexadecimal representation of the lines' RGB colour values.

TextFont

xsd:normalizedString

0: 1

Font identifier (font). Normally not specified.

TypeOfService inherits fromTypeOfValue and does not introduce new elements or attributes.

LineRef

LineRefStructure

1: 1

Reference to Line (Line) to which the Route belongs.

DirectionType

DirectionTypeEnumeration

0: 1

The direction of the route:

• inbound (towards the city centre or transport hub)

• outbound (from the city centre or transport hub) 

• clockwise (circular route in the clockwise direction)

• anticlockwise (circular route in the anticlockwise direction)

To be able to identify full- or partial circular routes clockwise/anticlockwise must be specified.

pointsInSequence

PointOnRoute

1: *

List of the routes points 

InverseRouteRef

RouteRefStructure

0: 1

Reference to any route that goes in the opposite direction

BorderCrossing

xsd:boolean

0: 1

Specifies whether the point is on the border between two countries.

TimingPointStatus

TimingPointStatusEnumeration

0: 1

Type of TimingPoint:

• timingPoint (the ScheduledStopPoint should also explicitly be regarded as a timing point in relevant systems)

• notTimingPoint (the ScheduledStopPoint should not be regarded as a timing point)

• secondaryTimingPoint (for arbitrary use)

tariffZones

TariffZoneRef

0: 1

List of TariffZones (TariffZone) the StopPoint belongs to

Not recommended to use, as this may be overridden by TariffZone / FareZone geography specified in the SiteFrame.

Presentation

Presentation

0: 1

Graphical elements related to StopPoint

TimingPointStatus

TimingPointStatusEnumeration

0: 1

Type of TimingPoint:

• timingPoint

• notTimingPoint (may indicate the expected passing time)

AllowedForWaitTime

xsd:duration

0: 1

Allowed waiting time at the TimingPoint.

LinkSequenceRef

LinkSequenceRefStructure

0: 1

Reference to LinkSequence to which the point belongs.

RouteRef should be used since Route inherits from LinkSequence.

Note that the field should not be used if PointOnRoute is defined inline in Route.

projections

Projection

0: *

Projection on a point (RoutePoint, TimingPoint, SchedueledStopPoint) or a GML-coordinate projection.

PointRef

PointRefStructure

1: 1

Reference to Point

RoutePointRef should be used to point to the corresponding RoutePoint.

FromPointRef

RoutePointRef

1: 1

The start point for the RouteLink

ToPointRef

RoutePointRef

1: 1

The endpoint for the RouteLink

Distance

xsd:decimal

0: 1

Distance in meters for ServiceLink, i.e. driving distance between FromPoint and ToPoint.

projections

LinkSequenceProjection

0: 1

Projection with <gml:LineString> indication of position.

FromPointRef

ScheduledStopPointRef

1: 1

The start point for the ServiceLink.

ToPointRef

ScheduledStopPointRef

1: 1

The endpoint for ServiceLink.

From

SiteConnectionEndStructure

1: 1

The starting point for SiteConnection

To

SiteConnectionEndStructure

1: 1

The endpoint for SiteConnection

navigationPaths

NavigationPath

0: *

Possible path links between Site-objects

StopPlaceRef

StopPlaceRef

0: 1

Reference to the StopPlace in question

QuayRef

QuayRef

0: 1

Reference to the Quay in question

StopPlaceEntranceRef

StopPlaceEntranceRef

0: 1

Reference to the Entrance in question

ScheduledStopPointRef

ScheduledStopPointRef

1: 1

Reference to ScheduledStopPoint

elem

StopPlaceRef

StopPlaceRef

0: 1

Reference to StopPlace which is related to ScheduledStopPoint

Acts only as supplementary information, as the StopPlace can always be derived (in the National Stop Registry) through its mandatory referenced Quay (QuayRef).

elem

QuayRef

QuayRef

1: 1

Reference to an actual Quay on StopPlace

elem

trainElements

TrainStopAssignmentRef

0: *

References to a detailed position on platform (TrainStopAssignment)

Used only for trains

attr

order

xsd:integer

1: 1

The Assignment order.

The "order" attribute is inherited from the more generic type Assignment, but in the case of a PassengerStopAssignment its business meaning is undefined. It is however mandatory due to an XML schema validation constraint.
Examples of valid implementations:

• an incremented sequence number ("1", "2", "3", ...)

• a constant value ("0")

FlexibleStopPlaceRef

FlexibleStopPlaceRef

1: 1

Reference to FlexibleStopPlace which is related to ScheduledStopPoint

(choice) FlexibleQuayRef

FlexibleQuayRef

0: 1

Reference to a FlexibleQuay.

Can be added in a supplementary role if a FlexibleQuay is used.

(choice) FlexibleAreaRef

FlexibleAreaRef

0: 1

Reference to an actual FlexibleArea

Can be added in a supplementary role if a FlexibleArea is defined for the FlexibleStopPlace.

(choice) HailAndRideAreaRef

HailAndRideAreaRef

0: 1

Reference to an actual HailAndRideArea

Can be added in a supplementary role if a HailAndRideArea is defined for the FlexibleStopPlace.

PassengerStopAssignmentRef

PassengerStopAssignmentRef

0: 1

Reference to PassengerStopAssignment

TrainRef

TrainRef

0: 1

Reference to Train.

TrainComponentRef

TrainComponentRef

0: 1

Reference to specific cars (TrainComponent).

BoardingPositionRef

BoardingPositionRef

0: 1

Reference to BoardingPosition.

EntranceToVehicle

MultilingualString

0: 1

Specifying entrances to the carriage, e.g. "front door", "rear door", etc.

PrivateCode

xsd:normalizedString

0: 1

Internal (non-public) identifier for the JourneyPattern.

RouteRef

RouteRef

1: 1

Reference to Route used in the JourneyPattern.

runTimes

JourneyPatternRunTime

0: *

Description of RunTimes for the JourneyPattern.

Only used when describing frequency-based departures.

waitTimes

JourneyPatternWaitTime

0: *

Description of WaitTime for JourneyPattern

Normally used only when describing frequency-based departures.

headways

JourneyPatternHeadway

0: *

Description of JourneyHeadway for JourneyPattern

Only used when describing frequency-based departures.

pointsInSequence

PointInJourneyPattern

0: *

Sorted list of points in JourneyPattern. Must be StopPointInJourneyPattern or TimingPointInJourneyPattern.

linksInSequence

LinkInJourneyPattern

0: *

Sorted list of links in JourneyPattern. Must be ServiceLinkInJourneyPattern or TimingLinkInJourneyPattern.

ScheduledStopPointRef

ScheduledStopPointRef

1: 1

Reference to ScheduledStopPoint

ForAlighting

xsd:boolean

0: 1

Specifies whether alighting is allowed.

Should be explicitly indicated (normally "false") for the first StopPointInJourneyPattern

ForBoarding

xsd:boolean

0: 1

Specifies whether boarding is allowed.

Should be explicitly indicated (normally "false") for last StopPointInJourneyPattern

DestinationDisplayRef

DestinationDisplayRef

0: 1

Reference to DestinationDisplay

The required minimum for linear routes is for the first StopPointInJourneyPattern to have a DestinationDisplayRef. For circular routes, the minimum is two.

A new DestinationDisplayRef should be set at any StopPointInJourneyPattern along the route where it is relevant to update the destination text. This is particularly relevant for circular routes.

RequestStop

xsd:boolean

0: 1

Specifies whether passengers must signal to use this stop point.

RequestMethod

RequestMethodTypeEnumeration

0: 1

Possible values for hailing or arranging a stop:

• handSignal

• phoneCall

• sms

• stopButton

• turnOnLight

StopUse

StopUseEnumeration

0: 1

Nature of use of stop:

• interchangeOnly

BookingArrangements

BookingArrangementsStructure

0: 1

Rules for booking.

Please note that BookingArrangements specified at the StopPointInJourneyPattern level will always override equivalent specifications at the Line- or ServiceJourney level.

BookingContact

ContactStructure

0: 1

Contact information for booking

Note that this field is mandatory if not already specified on FlexibleLine or overridden in FlexibleServiceProperties

BookingMethods

BookingMethodListOfEnumerations

0: 1

Possible ways to book (must match info found in BookingContact):

• callDriver

• callOffice

• online

• phoneAtStop

• text (text message/SMS)

• other

Note that this field is mandatory if not already specified on FlexibleLine or overridden in FlexibleServiceProperties

BookingAccess

BookingAccessEnumeration

0: 1

Who may place an order (book):

• public

• authorisedPublic (e.g. TT-transport - special services for mobility restricted travelers)

• staff

BookWhen

PurchaseWhenEnumeration

0: 1

Time constraints for booking:

• timeOfTravelOnly

• dayOfTravelOnly (requires LatestBookingTime to be set)

• untilPreviousDay (requires LatestBookingTime to be set)

• advanceAndDayOfTravel (requires LatestBookingTime to be set)

It is recommended to set this field if MinimumBookingPeriod is not specified (unless either is already specified on FlexibleLine or overridden in FlexibleServiceProperties)

BuyWhen

PurchaseMomentListOfEnumerations

0: 1

Time constraints for payment:

• onReservation

• beforeBoarding

• afterBoarding

• onCheckOut

LatestBookingTime

xsd:time

0: 1

Latest possible time for booking

Do not set if BookWhen is undefined or defined as “timeOfTravelOnly” (would be invalid)

MinimumBookingPeriod

xsd:duration

0: 1

The minimum time ahead of journey departure the booking must be completed

Can only be set (optionally) if BookWhen is undefined

BookingNote

xsd:normalizedString

0: 1

Additional information about the booking

TimingPointRef

TimingPointRef

1: 1

Reference to TimingPoint

WaitTime

xsd:duration

0: 1

Wait time at the timing point

(choice) TimingLinkInJourneyPattern

TimingLinkInJourneyPattern

1: 1

Sorted list of TimingLinks

(choice) ServiceLinkInJourneyPattern

ServiceLinkInJourneyPattern

1: 1

Sorted list of ServiceLinks

TimingLinkRef

TimingLinkRef

1: 1

Reference to ServiceLink

ServiceLinkRef

ServiceLinkRef

1: 1

Reference to ServiceLink

SideText

MultilingualString

0: 1

The text displayed on the side of the vehicle body.

FrontText

MultilingualString

1: 1

The text displayed on the front of the vehicle, commonly above the front window.

vias

Via

0: *

Intermediary stop(s) which the vehicle will pass before reaching its final destination.

Eg. Oslo tram line 11: "Majorstuen - Kjelsås via Torshov"

variants

DestinationDisplayVariant

0: *

Variations of DestinationDisplay adapted for particular media types

Note that for composite DestinationDisplay text, e.g. line number and destination name. The minimum requirement is to provide a DestinationDisplay for web sites, with a destination name.

DestinationDisplayVariantMediaType

DeliveryVariantTypeEnumeration

1: 1

Supported media types:

• Printed

• TextToSpeech

• Web

• Mobile

• other (e.g. real-time display)

FrontText

MultilingualString

1: 1

Frontpage text for DestinationDisplay

(attribute) order

xsd:integer

0: 1

Relative order for Via element.

DestinationDisplayRef

DestinationDisplayRef

1: 1

Reference to the DestinationDisplay object describing the stop place/area the vehicle is headed towards.

RoutePointRef

RoutePointRef

0: 1

Reference to RoutePoint.

ViaType

ViaTypeEnumeration

0: 1

Possible values:

• stopPoint

• name

FlexibleLineType

FlexibleLineTypeEnumeration

1: 1

Flexible line types:

• corridorService

• mainRouteWithFlexibleEnds

• flexibleAreasOnly

• hailAndRideSections

• fixedStopAreaWide

• mixedFlexible

• mixedFlexibleAndFixed

• fixed

BookingContact

ContactStructure

0: 1

Contact information for booking

BookingMethods

BookingMethodListOfEnumerations

0: 1

Possible booking methods:

• callDriver

• callOffice

• online

• phoneAtStop

• text (text message/SMS)

• other

BookingAccess

BookingAccessEnumeration

0: 1

Who may place an order (book):

• public

• authorisedPublic (e.g. TT-transport - special services for mobility restricted travelers)

• staff

BookWhen

PurchaseWhenEnumeration

0: 1

Time constraints for booking:

• timeOfTravelOnly

• dayOfTravelOnly (requires LatestBookingTime to be set)

• untilPreviousDay (requires LatestBookingTime to be set)

• advanceAndDayOfTravel (requires LatestBookingTime to be set)

BuyWhen

PurchaseMomentListOfEnumerations

0: 1

Time constraints for payment:

• onReservation

• beforeBoarding

• afterBoarding

• onCheckOut

LatestBookingTime

xsd:time

0: 1

Latest possible time for booking

Do not set if BookWhen is undefined or defined as “timeOfTravelOnly” (would be invalid)

MinimumBookingPeriod

xsd:duration

0: 1

The minimum time ahead of journey departure the booking must be completed

Can only be set (optionally) if BookWhen is undefined

BookingNote

xsd:normalizedString

0: 1

Additional information about the booking

FlexibleStopPlaceRef

FlexibleStopPlaceRef

1: 1

Reference to FlexibleStopPlace

Name

MultilingualString

0: 1

Name of the transfer

Description

MultilingualString

0: 1

Textual description

Distance

xsd:decimal

1: 1

Total length for transfer (in meters)

TransferDuration

TransferDuration

1: 1

Detailed description for duration transfer

BothWays

xsd:boolean

0: 1

Specifies whether the transfer is possible in both directions

DefaultDuration

xsd:duration

1: 1

Normal duration

FrequentTravellerDuration

xsd:duration

0: 1

The time it will take a person with local knowledge to complete the transfer (commuter)

OccasionalTravellerDuration

xsd:duration

0: 1

The time it will take a person unfamiliar with the place to complete the transfer (tourist etc.)

MobilityRestrictedTravellerDuration

xsd:duration

0: 1

The time it will take a person with special needs to complete the transfer